|
Universal waterproof housing for SLR lens cameras; Canon, Casio, FujiFilm, HP, Nikon, Olympus, Panasonic, Pentax, Samsung, Sanyo, Sony, Minolta, and Kodak
Fantastic case for your new Sony DSC-H50 camera!!
Take your DSLR/SLR digital camera almost anywhere!
Water parks - Swimming pool - Snorkeling - Boating - Diving - Surfing - Beach - Rainy day excursions - Skiing - Kayaking -Snowboarding - Camping - Hiking - Fishing - Rafting - Off roading
The DiCAPac WP-S10 SLR Pack is a PVC vinyl Waterproof underwater housing case, made to carry a SLR camera with a lens attached. The bellows type lens system 2.0-5.9" (5.0-15cm) allows the waterproof case to be used with many lenses. It can be used underwater to 16.4 ft (5m). It's easy to control with a built-in finger sleeve. It protects the camera from water, sand, dust, etc. The housing meets JIS IPX8 requirements for underwater usage and a neck strap is included.
WP-S10 Features:
- FREE Standard SHIPPING (USA only)
- Guaranteed underwater performance for up to 16ft (5m) depth
- UV coated polycarbonate optical lens
- Transparent and flexible case for convenient camera button controls
- Reliable double sealed closing system with waterproof zipper and Roll & Velcro opening
- Easy control with finger sleeve
- Comes with detachable neck strap
|
 |
WP-S10 Specifications:
- Case Dimensions: 7.48 x 10.63 x 9.06" / 19 X 27 x 23cm (L x W x H)
- Weight: 14.5 oz / 410g
- Material Body: High quality PVC with silicon and TPU rubber
- Material Lens: Polycarbonate, silicone and ABS
- Lens: Max length extension 200mm
- Lens Diameter: 85mm max filter thread
|
 |
WP-S10 Content:
- Waterproof case with removable optical lens
- Bellows lens sytem 2.0-5.9"/ 5.0-15cm (Allows use with many lenses)
- Detachable neck strap
- Instruction manual
- Retail pack
WP-S10 Fitting Guide:
Camera case fits SLR type cameras with the maximum dimensions showed below:

Instructions and notices:
Cautions before use:
After making your purchase, check if there is any damage on its surface.
After putting some paper or fabric into the DICAPAC, shake or press it in the water like the pictures above. Make an exchange if you find the papers or fabric are wet. We are not responsible for owner damages by carelessness or mistakes. It is expected that you test the product and its condition immediately after your purchase.
Caution while using:
- Use it after performing the waterproof test found in the <Caution before use> section, and checking the area between the lens adapter and the joint, unit or damage of the lens.
- Check for damage at the mouth and zipper after each use, and avoid strong impacts and sharp objects. Don't leave it under the hot sun for long. It can be damaged.
- There can be humidity in it depending on the difference of temperatures between the inside and outside of the product. If this is the case, just turn the lens to OPEN and you can remove the humidity.
- In case of sand or foreign matter, clean and rinse with running water.
Caution after use:
When taking your camera out of the case, keep the mouth part in a downward
position and shake off any water and wipe it well.
Be careful not to keep its mouth part upward.
It can cause product damage if water around the mouth enters into the case.
This waterproof case is for protecting the camera from dust, water, snow, rain, sand, etc. It is also made for comparatively simple underwater shots at a beach or a pool. Please use only dedicated housing or professional underwater shooting equipment for more professional underwater shots.
*** Please e-mail us with any questions you may have before buying. Thank you. ***
|